I am working on a 2007 Honda Fit with an ABS

Welcome to the site.

Has this car had any body work done on it? The ABS encoder is made into the wheel bearing assembly. I have seen body shops replace the bearing and install in backwards and not have the encoder ring facing the ABS sensor. I would check this first. The encoder side of the bearing is brown and needs to be facing in toward the sensor.

Hope that helps. Thanks for your question.

YES IT WAS IN A BODY SHOP AND THE BERRING AND SENSOR was replaced that was the first thing i checked. IT WILL READ THE WHEEL SPEED UP TO ABOUT 35 MPH THEN STOP READING AND RESET THE CODE

Are you using a tester that actually allows you to see individual wheel speeds? You should be able to moniter each wheel speed seperately. That code won't set until you drive it because the vehicle doesn't see a problem with it until the vehicle is moving. Unfortunately, there isn't any easy way to see the back side of the wheel bearing without removing it from the hub which just ruined the bearing so have another one on hand.

__________________
Question. $0 dollars.
Answer. $9/$15 dollars.
My time, experience and knowledge. Priceless.
Please remember to accept if I answered your question. Also feedback and any bonus is appreciated.

yes I can see all 4 wheel speeds I have a Factory Honda scanner that is the only wheel that stops sending a snigal is there any thing in the system beside the sensor and berring.Wat is code 22-11 and is the berring called the magnetic encoder

Code literally is DTC 22-11: Left-front Magnetic Encoder Malfunction (Pulse Missing). It basically tells you to clear code and test drive. If it recodes, inspect the magnetic encoder on the wheel bearing for damage or cracks. If there is nothing on the encoder ring, replace the wheel bearing. That is the (almost) step by step diagnose of that code from the manual.

Hope that helps.

__________________
Question. $0 dollars.
Answer. $9/$15 dollars.
My time, experience and knowledge. Priceless.
Please remember to accept if I answered your question. Also feedback and any bonus is appreciated.

I will try a new berring did you ever get a defective one out of the box?
thanks for your time

THIS ANSWER IS LOCKED!
You can view this answer by clicking here to Register or Login and paying $3.